Posted on by

Custom Design – Wall Joints

Custom Design – Wall Joints

Model ALEW – Custom Wall Joint

Model ALEW Wall joint system with spring lift, is designed to withstand maximum seismic movements.

With this new custom model the capability to deal with much larger range of expansion joint widths has increased.

Contact M.H. Powell & Co., Inc. for more information.



ModelDownloads
ALEW-5PDFCAD
ALEW-6PDFCAD
ALEW-7PDFCAD
ALEW-8PDFCAD
ALEW-9PDFCAD
ALEW-10PDFCAD
ALEW-11PDFCAD
ALEW-12PDFCAD

TRESPA PANEL Joint System – Custom – Wall Joint

Project specific custom design expansion join systems offer a wide range of options to make the elevations more architecturally appealing.

Use of magnets provide additional wind load support for wider seismic expansion joint covers.

Wall finish panels on Exterior / Interior walls can be installed on top of metal joint cover system making the expansion joint cover hidden.

Posted on by

Floor – Heavy Duty – Auto H2O

Floor – Heavy Duty – Auto H2O

Heavy Duty Floor Joints

M.H. Powell & Co., Inc. provides a series of seismic expanion joint covers to meet auto load and impacts. These heavy duty floor joint systems are designed to match most structural and design intent.

Due to auto traffic and constant heavy impact, the PTHD, PTHDXW, PTHDS, HDCIP and HDEXW models are incorporated with cast in place anchors which allow proper placement in post tension concrete floor systems

This adjustable anchoring system requires project field coordination for proper installation.

 
Model BOHD
Interior / Exterior Walls & Ceillings – Flat Conditions
Joint “A”ModelMax Opening“B” CoverDownloads
4″(101.60)BOHD-4+/-50%(2″)10.5″(266.70)PDFCAD
5″(127.00)BOHD-5+/-50% (2.5″)11.5″(292.10)PDFCAD
6″(152.40)BOHD-6+/-50%(3″)12.5″(317.50)PDFCAD
7″(177.80)BOHD-7+/-50%(3.5″)13.5″(342.90)PDFCAD
8″(203.20)BOHD-8+/-50%(4″)14″(355.60)PDFCAD
9″(228.60)BOHD-9+/-50%(4.5″)15.5″(393.70)PDFCAD

Consult M.H.Powell & Co., Inc. for joints larger than 12”.

Lorem ipsum dolor sit amet, consectetuer adipiscing elit

Model HDCIP
Joint “A”ModelMax Opening“B” CoverDownloads
4″(101.60)HDCIP-4+/-50%(2″)10.5″(266.70)PDFCAD
5″(127.00)HDCIP-5+/-50% (2.5″)11.5″(292.10)PDFCAD
6″(152.40)HDCIP-6+/-50%(3″)12.5″(317.50)PDFCAD
7″(177.80)HDCIP-7+/-50%(3.5″)13.5″(342.90)PDFCAD
Model HDEXW (Extra Wide)
Joint “A”ModelMax Opening“B” CoverDownloads
4″(25.40)HDEXW-4+/-50%(2″)14″(355.60)PDFCAD
5″(50.80)HDEXW-5+/-50% (2.5″)15″(381.00)PDFCAD
6″(152.40)HDEXW-6+/-50%(3″)16″(406.40)PDFCAD
Model PTHD
Joint “A”ModelMax Opening“B” CoverDownloads
4″(101.60)PTHD-4+/-50%(2″)11.5″(292.10)PDFCAD
5″(127.00)PTHD-5+/-50% (2.5″)12.5″(317.50)PDFCAD
6″(152.40)PTHD-6+/-50%(3″)13.5″(342.90)PDFCAD
7″(177.80)PTHD-7+/-50%(3.5″)14.5″(368.30)PDFCAD
8″(203.20)PTHD-8+/-50%(4″)15.5″(393.70)PDFCAD
9″(203.20)PTHD-9+/-50%(4.5″)16.5″(419.10)PDFCAD


Model PTHDS
Joint “A”ModelMax Opening“B” CoverDownloads
2″(25.40)PTHDS-2+/-50%(1″)8.25″(209.55)PDFCAD
3″(50.80)PTHDS-3+/-50% (1.5″)9.25″(234.95)PDFCAD
4″(101.60)PTHDS-4+/-50%(2″)10.25″(260.35)PDFCAD
5″(127.00)PTHDS-5+/-50%(2.5″)11.25″(285.75)PDFCAD
6″(152.40)PTHDS-6+/-50%(3″)12.25″(311.15)PDFCAD
Posted on by

Floor – custom – Fabricated

Floor – custom – Fabricated

Rotation – Hinged Floor Plates

M.H. Powell & Co., Inc. with its innovative technical approach is capable of providing a wide range of custom fabricated and project specific seismic design solutions. Custom floor joint systems offer more advanced technical properties in a user friendly design
  • Applicable for both new and existing conditions
  • Clean lines and a variety of finishes
  • Capability of handling 100% seismic movements
  • Accomodate seismic openings
Model ALFF
  • Custom Model Floor to Floor
Joint “A”ModelMax Opening“B” CoverDownloads
5″(127.00)ALFF-5+/-50% (2.5″)8.5″(215.90)PDFCAD
6″(152.40)ALFF-6+/-50%(3″)10″(254.00)PDFCAD
7″(177.80)ALFF-7+/-50%(3.5″)11.5″(292.10)PDFCAD
8″(203.20)ALFF-8+/-50%(4″)13″(330.20)PDFCAD
9″(228.60)ALFF-9+/-50%(4.5″)14.5″(368.30)PDFCAD
10″(254.00)ALFF-10+/-50%(5″)16″(406.40)PDFCAD
Model ALFW​
  • Custom Model Floor to Floor
Joint “A”ModelMax Opening“B” CoverDownloads
5″(127.00)ALFW-5+/-50% (2.5″)8.5″(215.90)PDFCAD
6″(152.40)ALFW-6+/-50%(3″)10″(254.00)PDFCAD
7″(177.80)ALFW-7+/-50%(3.5″)11.5″(292.10)PDFCAD
8″(203.20)ALFW-8+/-50%(4″)13″(330.20)PDFCAD
9″(228.60)ALFW-9+/-50%(4.5″)14.5″(368.30)PDFCAD
10″(254.00)ALFW-10+/-50%(5″)16″(406.40)PDFCAD
Model PHFW and PHFF
  • Custom Model Floor to Floor
Joint “A”ModelMax Opening“B” CoverDownloads
5″(127.00)PHFW-5+/-50% (2.5″)8.5″(215.90)PDFCAD
5″(127.00)PHFF-5+/-50% (2.5″)8.5″(215.90)
6″(152.40)PHFW-6+/-50%(3″)10″(254.00)PDFCAD
6″(152.40)PHFF-6+/-50%(3″)10″(254.00)
7″(177.80)PHFW-7+/-50%(3.5″)11.5″(292.10)PDFCAD
7″(177.80)PHFF-7+/-50%(3.5″)11.5″(292.10)
8″(203.20)PHFW-8+/-50%(4″)13″(330.20)PDFCAD
8″(203.20)PHFF-8+/-50%(4″)13″(330.20)
9″(228.60)PHFW-9+/-50%(4.5″)14.5″(368.30)PDFCAD
9″(228.60)PHFF-9+/-50%(4.5″)14.5″(368.30)
10″(254.00)PHFW10+/-50%(5″)16″(406.40)PDFCAD
10″(254.00)PHFF-10+/-50%(5″)16″(406.40)
Model PUL
  • Custom Floor Model

Model PUL is specifically designed to incorporate various architectural floor finishes. This model is in line with Model PU-Floor to Floor joint system. Model PUL can be used in both floor to floor and floor to wall conditions. Contact M.H. Powell & Co., Inc. for more details.
Model HD
  • Floor (EX’G/New) to Floor (EX’G/New)
Joint “A”ModelMax Opening“B” CoverDownloads
4″(101.60)HD-4+/-50%(2″)8″(203.20)PDFCAD
4″(101.60)HD-4-4+/-100% (4″)10″(254.00)PDFCAD
5″(127.00)HD-5+/-50%(2.5″)9.5″(241.30)PDFCAD
6″(152.40)HD-6+/-50%(3″)11″(279.40)PDFCAD
6″(203.20)HD-6-6+/-100%(6″)14″(355.60)PDFCAD
7″(177.70)HD-7+/-50%(3.5″)12.5″(317.50)PDFCAD
7″(177.70)HD-7-7+/-100%(7″)16″(406.40)PDFCAD
8″(177.70)HD-8+/-50%(4″)14″(355.60)PDFCAD
8″(203.20)HD-8-8+/-100%(8″)18″(457.20)PDFCAD
9″(177.70)HD-9-9+/-50%(4.5″)15.5″(393.70)PDFCAD
Model PUL
  • Custom Floor Model

PHEV – Floor (Existing) to Floor (Existing) ‘No Frills’ Auto Traffic Thresholds with pre-formed low density closed compressible filler with adhesives. Assembly is available for up to 6″ wide joints. Consult M.H. Powell & Co., Inc for larger seismic separations. Model PHEVL – Floor(EX’G/New) to Wall available. *Aluminium cover plate thickness varies with seismic joint width ‘A’.
Posted on by

Aluminum Roof Systems

Aluminum Roof Systems

Aluminum Roof Joint Covers

M.H. Powell & Co., Inc. provides a variety of seismic expansion joint covers for roofs to match different project specific conditions.

Aluminum roof cover systems can be custom fabricated to match maximum seismic movements at each given condition.

The adjustability of the fabricated Aluminum cover plate provides the required movement capability without modifying any other assembly component.
Aluminum roof joint systems offer different mounting methods to match both new and existing conditions.

  • Aluminum roof cover plate thickness varies to match seismic joint width.
 

Model RR (Roof to Roof)

“A” VoidModelMax Opening“B” CoverDownloads
2″(50.80)RR-2+/-4″(101.60)10″(254.00)PDFCAD
3″(76.20)RR-3+/-4.5(114.30)11″(279.40)PDFCAD
3″(76.20)RR-3-3+/-6″(152.40)11″(279.40)PDFCAD
4″(101.60)RR-4+/-6″(152.40)12″(304.80)PDFCAD
4″(101.60)RR-4-4+/-8″(203.20)12″(304.80)PDFCAD
5″(127.00)RR-5+/-7.5″(190.50)13″(330.20)PDFCAD
5″(127.00)RR-5-5+/-10″(254.00)13″(330.20)PDFCAD
6″(152.40)RR-6+/-9″(228.60)14″(355.60)PDFCAD
6″(152.40)RR-6-6+/-12″(304.80)14″(355.60)PDFCAD
7″(177.80)RR-7+/-10.5″(266.70)15″(381.00)PDFCAD
7″(177.80)RR-7-7+/-14″(355.60)16″(406.40)PDFCAD
8″(203.20)RR-8+/-12″(304.80)16″(406.40)PDFCAD
8″(203.20)RR-8-8+/-16″(406.40)18″(457.20)PDFCAD
9″(228.60)RR-9+/-13.5″(342.90)17″(431.80)PDFCAD
9″(228.60)RR-9-9+/-18″(457.20)20″(508.00)PDFCAD
10″(254.00)RR-10+/-15″(381.00)18″(457.20)PDFCAD

Consult M.H.Powell & Co., Inc. for joints larger than 10”.

Lorem ipsum dolor sit amet, consectetuer adipiscing elit

Model RPP

“A” VoidModelMax Opening“B” CoverDownloads
2″(50.80)RPP-2+/-4″(101.60)10″(254.00)PDFCAD
3″(76.20)RPP-3+/-4.5(114.30)11″(279.40)PDFCAD
3″(76.20)RPP-3-3+/-6″(152.40)11″(279.40)PDFCAD
4″(101.60)RPP-4+/-6″(152.40)12″(304.80)PDFCAD
4″(101.60)RPP-4-4+/-8″(203.20)12″(304.80)PDFCAD
5″(127.00)RPP-5+/-7.5″(190.50)13″(330.20)PDFCAD
5″(127.00)RPP-5-5+/-10″(254.00)13″(330.20)PDFCAD
6″(152.40)RPP-6+/-9″(228.60)14″(355.60)PDFCAD
6″(152.40)RPP-6-6+/-12″(304.80)14″(355.60)PDFCAD
7″(177.80)RPP-7+/-10.5″(266.70)15″(381.00)PDFCAD
7″(177.80)RPP-7-7+/-14″(355.60)16″(406.40)PDFCAD
8″(203.20)RPP-8+/-12″(304.80)16″(406.40)PDFCAD
8″(203.20)RPP-8-8+/-16″(406.40)18″(457.20)PDFCAD
9″(228.60)RPP-9+/-13.5″(342.90)17″(431.80)PDFCAD
9″(228.60)RPP-9-9+/-18″(457.20)20″(508.00)PDFCAD
10″(254.00)RPP-10+/-15″(381.00)18″(457.20)PDFCAD
Consult M.H.Powell & Co., Inc. for joints larger than 10”. Lorem ipsum dolor sit amet, consectetuer adipiscing elit

Model CRR (Roof to Roof – Metal Roofing)

“A” VoidModelMax Opening“B” CoverDownloads
2″(50.80)CRR-2+/-4″(101.60)8″(203.20)PDFCAD
3″(76.20)CRR-3+/-4.5(114.30)8.5″(215.90)PDFCAD
3″(76.20)CRR-3-3+/-6″(152.40)10″(254.00)PDFCAD
4″(101.60)CRR-4+/-6″(152.40)10″(254.00)PDFCAD
4″(101.60)CRR-4-4+/-8″(203.20)12″(304.80)PDFCAD
5″(127.00)CRR-5+/-7.5″(190.50)11.5″(292.10)PDFCAD
5″(127.00)CRR-5-5+/-10″(254.00)14″(355.60)PDFCAD
6″(152.40)CRR-6+/-9″(228.60)13″(330.20)PDFCAD
6″(152.40)CRR-6-6+/-12″(304.80)16″(406.40)PDFCAD
7″(177.80)CRR-7+/-10.5″(266.70)14.5″(368.30)PDFCAD
7″(177.80)CRR-7-7+/-14″(355.60)18″(457.20)PDFCAD
8″(203.20)CRR-8+/-12″(304.80)16″(406.40)PDFCAD
8″(203.20)CRR-8-8+/-16″(406.40)20″(508.00)PDFCAD
9″(228.60)RR-9+/-13.5″(342.90)17.5″(444.50)PDFCAD
9″(228.60)CRR-9-9+/-18″(457.20)22″(558.80)PDFCAD
10″(254.00)CRR-10+/-15″(381.00)19″(482.60)PDFCAD
Consult M.H.Powell & Co., Inc. for joints larger than 10”. Lorem ipsum dolor sit amet, consectetuer adipiscing elit

Model RW (Roof to Wall)

“A” VoidModelMax Opening“B” CoverDownloads
2″(50.80)RW-2+/-4″(101.60)6″(152.40)PDFCAD
3″(76.20)RW-3+/-4.5(114.30)7″(177.80)PDFCAD
3″(76.20)RW-3-3+/-6″(152.40)7″(177.80)PDFCAD
4″(101.60)RW-4+/-6″(152.40)8″(203.20)PDFCAD
4″(101.60)RW-4-4+/-8″(203.20)9″(288.60)PDFCAD
5″(127.00)RW-5+/-7.5″(190.50)9″(288.60)PDFCAD
5″(127.00)RW-5-5+/-10″(254.00)11″(279.40)PDFCAD
6″(152.40)RW-6+/-9″(228.60)10″(254.00)PDFCAD
6″(152.40)RW-6-6+/-12″(304.80)13″(330.20)PDFCAD
7″(177.80)RW-7+/-10.5″(266.70)11.5″(292.10)PDFCAD
7″(177.80)RW-7-7+/-14″(355.60)15″(381.00)PDFCAD
8″(203.20)RW-8+/-12″(304.80)13″(330.20)PDFCAD
8″(203.20)RW-8-8+/-16″(406.40)17″(431.80)PDFCAD
9″(228.60)RW-9+/-13.5″(342.90)14.5″(368.30)PDFCAD
9″(228.60)RW-9-9+/-18″(457.20)19″(482.60)PDFCAD
10″(254.00)RW-10+/-15″(381.00)16″(406.40)PDFCAD
Consult M.H.Powell & Co., Inc. for joints larger than 10”. Lorem ipsum dolor sit amet, consectetuer adipiscing elit

Model RPW (Roof Parapet to Roof)

“A” VoidModelMax Opening“B” CoverDownloads
2″(50.80)RPW-2+/-4″(101.60)6″(152.40)PDFCAD
3″(76.20)RPW-3+/-4.5(114.30)7″(177.80)PDFCAD
3″(76.20)RPW-3-3+/-6″(152.40)7″(177.80)PDFCAD
4″(101.60)RPW-4+/-6″(152.40)8″(203.20)PDFCAD
4″(101.60)RPW-4-4+/-8″(203.20)9″(288.60)PDFCAD
5″(127.00)RPW-5+/-7.5″(190.50)9″(288.60)PDFCAD
5″(127.00)RPW-5-5+/-10″(254.00)11″(279.40)PDFCAD
6″(152.40)RPW-6+/-9″(228.60)10″(254.00)PDFCAD
6″(152.40)RPW-6-6+/-12″(304.80)13″(330.20)PDFCAD
7″(177.80)RPW-7+/-10.5″(266.70)11.5″(292.10)PDFCAD
7″(177.80)RPW-7-7+/-14″(355.60)15″(381.00)PDFCAD
8″(203.20)RPW-8+/-12″(304.80)13″(330.20)PDFCAD
8″(203.20)RPW-8-8+/-16″(406.40)17″(431.80)PDFCAD
9″(228.60)RPW-9+/-13.5″(342.90)14.5″(368.30)PDFCAD
9″(228.60)RPW-9-9+/-18″(457.20)19″(482.60)PDFCAD
10″(254.00)RPW-10+/-15″(381.00)16″(406.40)PDFCAD

Consult M.H.Powell & Co., Inc. for joints larger than 10”.

Lorem ipsum dolor sit amet, consectetuer adipiscing elit

Model CRW (Roof to Wall – Metal Roofing)

“A” VoidModelMax Opening“B” CoverDownloads
2″(50.80)CRW-2+/-4″(101.60)6″(152.40)PDFCAD
3″(76.20)CRW-3+/-4.5(114.30)6.5″(165.10)PDFCAD
3″(76.20)CRW-3-3+/-6″(152.40)8″(203.20)PDFCAD
4″(101.60)CRW-4+/-6″(152.40)8″(203.20)PDFCAD
4″(101.60)CRW-4-4+/-8″(203.20)10″(254.00)PDFCAD
5″(127.00)CRW-5+/-7.5″(190.50)9.5″(241.30)PDFCAD
5″(127.00)CRW-5-5+/-10″(254.00)12″(304.80)PDFCAD
6″(152.40)CRW-6+/-9″(228.60)11″(279.40)PDFCAD
6″(152.40)CRW-6-6+/-12″(304.80)14″(355.60)PDFCAD
7″(177.80)CRW-7+/-10.5″(266.70)12.5″(317.50)PDFCAD
7″(177.80)CRW-7-7+/-14″(355.60)16″(406.40)PDFCAD
8″(203.20)CRW-8+/-12″(304.80)14″(355.60)PDFCAD
8″(203.20)CRW-8-8+/-16″(406.40)18″(457.20)PDFCAD
9″(228.60)CRW-9+/-13.5″(342.90)15.5″(393.70)PDFCAD
9″(228.60)CRW-9-9+/-18″(457.20)20″(508.00)PDFCAD
0″(254.00)CRW-10+/-15″(381.00)17″(431.80)PDFCAD
Consult M.H.Powell & Co., Inc. for joints larger than 10”. Lorem ipsum dolor sit amet, consectetuer adipiscing elit
Posted on by

Expand-o-Flash

Expand-o-Flash

Expand-O-Flash joint covers are designed to manage seismic movements of roof joints. These systems are applicable to both new and existing roof conditions as well as related exterior walls. Each cover is a combination of flexible Elastromeric membrane, supported by a closed cell foam,forming a flexible bellow with two metal flanges. Expand-o-Flash system covers are flexible, waterproof and provide ease of installation. Refer Johns Manville Roofing Systems Group for more information www.jm.com

Metal Flanges are available in:

  • 26 GA Galvanized steel
  • Mill Finish Aluminium (0.032″)
  • Stainless Steel (0.081″)
  • Copper (16 oz)
*Alternative materials available upon request

Flexible Rubber Membranes

  • White or Black 60 Mil EPDM
  • Black 60 Mil Neoprene
*Standard color – Black

Model EJ/WC

Model EJ

Model EJ

Model EJ

Roof Curb to Roof Curb

OpeningBellow WidthFoam ThicknessStyle EJStyle CF & CF-EJDownloads
1 1/2″ TO 2 1/2″4″(101.60)3/8″(0.375″)EJ-4 (10ft/50ft)CF-4,CF-EJ-4 (10ft)
2 1/2″ TO 3 1/2″6″(152.40)1/2″(0.500″)EJ-6 (10ft/50ft)CF-6,CF-EJ-6 (10ft)
3 1/2″ TO 5″8″(203.00)1/2″(0.500″)EJ-8 (10ft/50ft)CF-8,CF-EJ-8 (10ft)
5″ TO 6 1/2″10″(254.00)5/8″(0.625″)EJ-10 (10ft)CF-10,CF-EJ-10 (10ft)
6 1/2″ TO 8″12″(304.80)3/4″(0.750)EJ-12 (10ft)CF-12,CF-EJ-12 (10ft)

Rule of Thumb to determine bellow width based on +/- 50% movement

Roof to Roof models : 1.5 x(‘A’ Joint width)

Roof to Wall models : 2.0 x(‘A’ Joint width)

Contact M.H. Powell & Co., for conditions with wider curbs.

Model EJ

Bellow Width4″6″8″10″12″14″16″18″20″24″
Mounting Height ‘H’ 2 1/2″3 3/4″5″6 1/4″7 1/2″8 1/4″10 1/4″11 1/2″12 3/4″15 1/4″
Posted on by

Compression Seals

For this product, please contact MH Powell at 323-887-0037.

Posted on by

Architectural Wall & Celling Panels

For this product, please contact CMC Custom Metal Contacting LTD.